A piston ring compressor is necessary for the installation of pistons into the cylinder block. The compressor folds around the piston, holding the rings in their grooves and allowing the piston and ring assembly to slide into the bore without damaging the pistons or rings. A great time saving tool. Designed for professional use and fits pistons 53mm to 125mm in diameter. Manufactured from quality sprung steel with a ratchet action tension mechanism. Adjustable with a 1/4″ drive key (supplied). Quick release button.
A strong magnetic spray can storage tray that can accommodate THREE standard size spray cans. It also has SEVEN holes in front of the hole cans with exit holes in the bottom so can also be used for screwdrivers, etc. The holes vary in diameter from 7mm to 11mm. They come with SIX strong magnets that have a maximum holding capacity of approx. 1.8kg (4lbs). Overall dimensions are 300 (W) x 115 (D) x 130 (H) mm. Can hole diameter is 75mm. All measurements are approximate. Supplied boxed.
A professional quality set of extractors to remove broken studs, pipes, set screws, grease fittings, etc. Manufactured by US.PRO Tools (formerly known as Bergen Tools), one of the more respected hand tool manufacturers on the market. Featuring large, serrated, reverse thread with a channel that aids engagement with the work piece. Manufactured from CR-MO (Chromium Molybdenum Steel) with heat treatment to obtain maximum hardness and a phosphate black finish. Contains the following: #1 – 3mm for extracting fixings 3mm to 5mm in diameter. #2 – 4mm for extracting fixings 4mm to 6mm in diameter. #3 – 5mm for extracting fixings 5mm to 8mm in diameter. #4 – 6mm for extracting fixings 6mm to 9mm in diameter. #5 – 8mm for extracting fixings 8mm to 11mm in diameter. #6 – 10mm for extracting fixings 10mm to 13mm in diameter.
A very handy tool for accessing hard to see areas. Especially useful for mechanics when working on engines. The mirror is rectangular and measures approx. 50mm x 90mm and it extends from 290mm to 460mm.
A handy piece of kit, suitable for the repairing of spark plug threads. The set contains a special 1HSS thread cutter with a 16mm 6 point drive. Suitable for a M14 x 1.25mm threaded spark plug. Supplied with FIFTEEN inserts with depths of 11mm, 16mm and 19mm. All supplied in a handy sliding clip storage case for neat storage and easy transportation.
US PRO 1/2″ DRIVE TORQUE ANGLE GAUGE Used to gauge degree of turn when manufacturer calls for fasteners to be tightened further after torque loads are applied. Easy to read dial. Calibrated in degrees. 1/2 Square Drive.
