5041 Front Axle Seal Installer Tool for Dana 44/60 for Chrysler Dodge Jeep Ram

HomePaymentShippingReturn PolicyAbout UsContact UsFeedbackStore CategoriesOtherAUTOMOBILEMOTORCYCLETOOLMOVING OLDER ITEMSTROBE LIGHT5041 Front Axle Seal Installer Tool for Dana 44/60 for Chrysler Dodge Jeep Ram Fitment:For Chrysler/Dodge/Jeep/Ram vehicle models. Suitable for Dana 44/60 model. Function:An handy and effective tool for seal replacement. Some customers also pointed out that it can be applied on both the driver side and the passenger side. Feature:Use this tool to install front axle seals into Dana models 44 and 60 disconnect axles to their proper depth. Also used with 8411, 8415, 8416, 8417A & 8834. There are different assembly for different kinds of installations as you needed. Material:Made of premium steel, provides longer service life and better performance. Installation 1. Install the front axle seal first, then insert the tool from the outside of the front axle. 2. Fully assemble the tool. 3. Tighten the nut with a wrench to push the seal into the correct position. 4. After the seal is installed, remove the tools. (Note: for reference only; Plz refer to your actual operation)Popular Products

Consulte para mais informação
9007A Compression Test Adapter Test Gauge Tool for 5.9L 6.7L Dodge Ram Cummins

These Test Adapters are used for 1998-1/2 to Current 24V Cummins 5.9 6.7 Liter Diesel. 2006-2008(Ram Truck) – Systems (9 – Engine, 5.9L Diesel) | 2009 (Ram Truck 2500/3500) – Systems (9 – Engine, 5.9L Diesel, 9 – Engine, 6.7L Diesel) | 2010 (Ram Truck Cab Chassis, Ram Truck 4500, Ram Truck 1500) – Systems (9 – Engine, 6.7L Diesel) | 2011 -2012 (Ram Truck 1500) – Systems (9 – Engine, 6.7L Diesel) | 2013-2014 (Ram Truck 3500, Ram Truck Heavy Duty, Ram Truck Cab Chassis, Ram Truck 4500, Ram Truck 2500) – Systems (9 – Engine, 6.7L Diesel).

Consulte para mais informação
For Dodge Cummins Engine Barring Tool Injection Pump Gear Puller Lock Nut Wrench

HomePaymentShippingReturn PolicyAbout UsContact UsFeedbackStore CategoriesOtherAUTOMOBILEMOTORCYCLETOOLMOVING OLDER ITEMSTROBE LIGHTFor Dodge Cummins Engine Barring Tool Injection Pump Gear Puller Lock Nut WrenchITEMS DESCRIPTIONInjection Pump Gear PullerFitment: Works on all VE, P7100, and VP44 Pumps, fits Cummins Both 4BT and 6BT. Features: 1.Heavy duty injection pump gear puller for cummins engines including those found in Dodge Ram Pickup Trucks. 2.The fastest and easiest way to remove your injection pump gear. 3.Zero contact with your front cover and an effortless pull. 4.All you need to supply are two flange bolts. The bolts needed are M8x1.25 size.Engine Barring ToolFitment: Works on Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L diesels engines and Cummins B/C Series diesels engines. Features: -High quality 42 CrMo Steel ensure great tolerance and good performance -Rotating the engine is so easy. -With this tool it takes less time to turn the engine over or to turn the crank while performing valve lash adjustment! Easy to use: Just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2″ square drive ratchet or breaker bar and turn.13mm Injection Pump and Idle Lock Nut Wrench Fitment: Fit for Cummins B series 5.9L diesel engines Dodge trucks. -Has also been found to be useful in many other applications where these size fasteners are in a confined area. Function: Remove and install the 13mm injection pump mounting bolts and idle lock nuts found on Cummins B series 5.9L diesel engines used in Dodge trucks. Dimensions: -Overall Height – Top to Bottom: -0.5 Inches. Overall Width – Side to Side: -4 Inches. Overall Depth – Front to Back: -8 Inches. Overall Product Weight: -0.4 Pounds. Package Included: 1× injection pump gear puller with two heavy duty flange bolts 1×engine barring/rotating Tool 1×injection pump & idle lock nut wrench Popular Products

Consulte para mais informação
for Dometic MICRO P-711 Refrigerator Power Supply Control Circuit Board

HomePaymentShippingReturn PolicyAbout UsContact UsFeedbackStore CategoriesOtherAUTOMOBILEMOTORCYCLETOOLMOVING OLDER ITEMSTROBE LIGHTfor Dometic MICRO P-711 Refrigerator Power Supply Control Circuit BoardItem DescriptionAPPLICATION: The micro p-711 control board is used in 2-way, 3-way, AMES, AES, adjustable-temperature, and fixed-temp. Compatible with Dometic refrigerators following models: S1521, S1531, S1621, S1631, S1821, S1831; RM2554, RM2607, RM2611, RM2612, RM2620, RM2652, RM2807, RM2811, RM2812, RM2820, RM2825, RM3607, RM3662, RM3663, RM3807, RM3862, RM3863, RM4872, RM4873, RM7030, RM7732, RM7832; NDR1062, NDR1272, NDR1282, NDR1492. FUNCTION: The P711 control board has all the OEM control board functions and also features temperature adjustment that allows you to fine-tune the temperature of units equipped with a temp selector. This board has an improved thermocouple circuit to eliminate the “Recurring check light” problem and it keeps the refrigerator operating if the eyebrow board or communication link fails to keep food safe and cool. FEATURES: The improved thermocouple circuit has connections for both thermocouple leads, to eliminate ground bounce problems. Fuse protected on the 120 VAC circuit, 12 VDC supply, and the DC element. REPLACEMENT KIT: The micro P-711 control board replaces any black box board part number that starts with “293”, and replaces 2931842.01, 2931842.02, 2931842.03, 2931842.04, 2931843.01, 2931843.02, 2931843.03, 2931843.04, 2932691.017, 2932177.01, 2932695.01, 2932770.01, 2932881.01, 2932881.01, and The Micro P-711 can’t replace any Black Box Board part number that starts with “385”! Popular Products

Consulte para mais informação
4918991 Front Crankshaft Seal Wear Sleeve Remover/Installer for Cummins ISX12 15

HomePaymentShippingReturn PolicyAbout UsContact UsFeedbackStore CategoriesOtherAUTOMOBILEMOTORCYCLETOOLMOVING OLDER ITEMSTROBE LIGHT4918991 Front Crankshaft Seal Wear Sleeve Remover/Installer for Cummins ISX12 15 Product Description 🔧Crankshaft Front Seal Tool & Wear Sleeve Remover Installer Perfect Fitment: This tool set is used for Cummins ISX12 and ISX15 with single overhead cam.Practical Function:This is specifically designed to remove and install the front crankshaft seal and wear sleeve without any damage or leakage, which helps you finish the process at ease.Premium Quality: Advanced CNC machined heavy duty steel with black anodized finish, durability, strong and anti-corrosion. High precision and hardness to provide a much longer service life.Direct Replacement: Alternative to part numbers 4918991 both in function and performance. It is precisely manufactured and tested to meet original equipment standards and performance.Satisfaction Guarantee – If you’re not satisfied with the kit, simply return for a full refund in 30 days or get a replacement during 1 year warranty via our customer service.📦Package Include: 1 * Sleeve Remover 3 * Washers 3 * Nuts 3 * Nuts 3 * Studs 3* Forcing Screws 2 * Hex-head Screws 6 * Self Tapping Screws Popular Products

Consulte para mais informação
10105 Universal U-Joint Puller Press Removal Tool For Car Light Duty Truck

HomePaymentShippingReturn PolicyAbout UsContact UsFeedbackStore CategoriesOtherAUTOMOBILEMOTORCYCLETOOLMOVING OLDER ITEMSTROBE LIGHT10105 Universal U-Joint Puller Press Removal Tool For Car Light Duty TruckItem Description 10105 Type U Joint Puller Manufacturer Part Number 10105 Material Steel Color Black Finish Black Anodized Automotive Type Class 1-3 Compatible Bearing Cups Size 1-1.25 inch/2.5-3.2 cm O.D. Package included: 1 x Univeral Joint Puller Tool Application: U-Joints with bearing cups 1″ to 1.25″ O.D. Works on cars, light-duty trucks, and farm machinery. Compatible with Ford F-150/350 Chevrolet 1500/3500 Ram 1500/3500, etc. Features: High Quality: Manufactured from high standard carbon steel. Great strength, high pressure capacity and super durability. No corrosion and rust and no deformation and fade. According to #10105, providing the most effective mechanical advantage for disassembly. Eliminates dangerous vice and socket or hammering methods. Reduces the risk of damage to driveshaft, yokes, joints or bearing cups. Can be used on aluminum driveshafts. One piece unit – No bolts, cables, or assembly required.STEP 1 Remove all fasteners from bearing cups.STEP 2 Slip the U-Joint Puller over the yoke of the driveline.STEP 3 Turn the tool’s forcing screw clockwise with either an air or and wrench. (Note: reverse thread)STEP 4 Once bearing cup has been removed, repeat the process on the remaining bearing cups. Popular ProductsPaymentDelivery detailsReturnAbout usContact usPaymentWe accept PayPal or another payment method . All major credit cards are accepted through secure payment processor PayPal.Delivery detailsWe are US seller, all Items will be shipped out within 2 working days from our West or East warehouses upon receipt of your cleared payment. We are duty off on weekends and other public holidays. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.Please check with your countries customs office to determine what these additional costs will be prior to bidding/buying.ReturnAll of our items come with a 60-day return policy. We insure all our items are new and in excellent condition prior to shipping. In the event that you receive the item is not in the standards above, please contact us via eBay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation. If you need to return, please double check to make sure the item does not work and contact our customer service representative, let us know the detailed problem and send us some photos for confirmation. Then get a unique address to return. Buyer is responsible for return shipping fee, including original freight, handling charges and the return freight when the returns is non-seller mistake (e.g. you purchased wrong model, wrong color or wrong size) We only accept return for original package, please make sure the item has not been used or installed. We reserve the right to refuse any return for any request that does not meet these requirements.About usWe are selling Led lights, auto and motorcycle accessories, home garden and sports equipment. Best price, quality and service. Follow us and get more promotional news.Contact usProviding good customer service is our first priority. You are welcome to contact us through eBay message if you have any questions. We normally get back to you within 12-24 business hours.

Consulte para mais informação